VW Trikes at JW Motorcycles

Home / Custom Parts / Classic Brit Parts / Spares / Gauges / T Shirts / Links / Contact

PRICES
(Links to trike builds at bottom of page)

PLAIN FRAME FITTED TO A VW TORSION BAR £350.00
(Includes, 3 body mounts .price based on a useable torsion bar in exchange)

PLAIN FRAME WITHOUT TORSION BAR £300.00
(Includes gussets needed to weld frame to torsion bar and instructions)

2 SEATER BODYSHELL IN WHITE £350.00

	55MM SEALED TAPERED HEAD BEARING £14.00
	52MM TAPERED HEAD BEARING £14.00

please note that although these shells are white gelcoat finish, they will need buffing and painting to complete They are not ready to bolt on as is

I can supply a shell. in almost any colour gelcoat but these are bought in and cost in the region of 8 to £900.00

At present we need up to 30 days to produce a frame and shell. Less if only a frame or shell is required.
As standard we fit a 170mm long headstock fitted with 52-55mm bearings.
If you require a different length headstock it’s no problem, but responsibility is yours to ensure we are given the correct sizes.
The 42 deg rake we use for the headstock is based on the average length jap front end.
If you are using an extended front-end we again must have the correct length.
Also note that a longer front-end would mean a different rake which would increase the trail making the steering heavy at speed.
Although our work is guaranteed we cannot take any responsibility for any fabrication/welding or alterations carried out by the customer

If you have any questions please contact us advice is free

Vw fibreglass shelled trikes
I will build both on here.
The first one will use the beetles torsion bar set up.
The second will be one of my own frames which uses it's own suspension setup. Both will use the same shell as pictured below, except one will have the nose cut back to use a 4,5 gallon quickbob tank, which also adds some much needed weight to the front. As anyone who has ridden a vw trike knows. The front ends are light